American Wire Group - Item # USE2-C1, USE-2 / RHH / RHW-2<br>600 Volts, 90<sup>o</sup>C Wet or Dry
 Search Catalog
      GO   
 All Categories    USE-2 / RHH / RHW-2
Copper Conductor
600 Volts, 90oC Wet or Dry
AWG CODE NAME FINDER
Enter code name in the search field to the left for specific product information
All Categories > Copper Building Wire > THHN/THWN-2 Copper Conductor
600 Volts, 90oC Dry or 75oC Wet > IMSA 50-2
Loop Detector Lead-In Wire > 
Single Conductor
600 V Secondary Type UD Cable
Aluminum Conductor > Mobile Home Feeder - Aluminum Conductor > Covered Line Wire ACSR
Aluminum Conductor > Type TFFN/TFN Copper Conductor
600 Volts 90oC Dry Locations > Ground Rod Accessories - Driving Studs > XHHW-2 XLP Copper Conductor
600 Volts, 90oC Wet or Dry > USE-2 / RHH / RHW-2
Copper Conductor
600 Volts, 90oC Wet or Dry > Item # USE2-C1  
    Download PDF Download PDF     Email Email This Page     Save To Favorites Save To Favorites
Request Information

Item # USE2-C1 USE-2 / RHH / RHW-2
600 Volts, 90oC Wet or Dry


    Download PDF Download PDF  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Copper building wire

larger image
Applications:
Single conductor crosslinked polyethylene (XLP or XLPE) Type RHW-2 and USE-2 for use at 600 volts or less. It is approved per the NEC for general purpose lighting and power applications at a maximum continuous operating temperature of 90oC in wet and dry locations. Suitable for direct burial.

Construction:
The single copper conductors shall be solid or stranded annealed or hard uncoated copper per UL83 and ASTM requirements. Insulated with XLP as specified and applied tightly to the conductor in a concentric manner. All black insulation is rated "Sunlight Resistant". The minimum at any point shall not be less than 90% of the specified average thickness in compliance with UL 44. The wire shall be identified by surface marking indicating the manufactuer, conductor size, voltage rating, UL symbol, and type designation. The wire shall be continuously spark tested at 7500 Volts DC. Other electrical and mechanical tests shall be in accordance with UL44, UL 854 and UL 1581.

Standards:
  • ASTM B-1, B-3, and B-8 for copper conductors.
  • ICEA S-66-524/NEMA WC7 Cross Linked Polyethylene Insulated Wire & Cable, UL 854 for Service Entrance Cables (incl. Para. 854-38.7 for 300 hr. sunlight resistance) and UL 44 for Thermoset Insulated Wires & Cables, Fed Spec J-C-30B.




    		•

    Specifications

    Size AWG or MCM

    		1

    Number
    of
    Strands

    		19

    Insulation Thickness
    (mls)

    		80

    Approx O.D.
    (Inches)

    		0.51

    Copper Weight
    (lbs. per MFT)

    		258.4

    Shipping Weight
    (lbs. per MFT)

    		319

    Ampacity 90°C Dry

    		150

    Request Information